Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Body Lock Pillar Garnish Molding Nut | 5 N.m (44 lb in) |
| Cargo Tie Down Loop Bolt | 20 N.m (15 lb ft) |
| Center Pillar Upper Garnish Molding Bolt | 2.5 N.m (22 lb in) |
| Front Side Door Inside Handle Bolt | 2.5 N.m (22 lb in) |
| Front Side Door Trim Bolt | 2.5 N.m (22 lb in) |
| Front Side Door Trim Panel Bolt | 2.5 N.m (22 lb in) |
| Liftgate Lower Trim Finish Panel Bolt | 2.5 N.m (22 lb in) |
| Luggage Shade Retainer | 2 N.m (18 lb in) |
| Quarter Window Lower Trim Finish Panel Bolt | 2.5 N.m (22 lb in) |
| Quarter Window Trim Finish Panel Bolt | 2.5 N.m (22 lb in) |
| Rear Compartment Floor Stowage Compartment Divider Retainer | 3 N.m (27 lb in) |
| Rear Side Door Inside Handle Bolt | 2.5 N.m (22 lb in) |
| Rear Side Door Trim Bolt | 2.5 N.m (22 lb in) |
| Rear Side Door Trim Panel Bolt | 2.5 N.m (22 lb in) |
| Roof Rail Assist Handle Bolt | 6 N.m (53 lb in) |
| Sunshade Bolt | 2 N.m (18 lb in) |
| Sunshade Support Bolt | 2.5 N.m (22 lb in) |
| Windshield Garnish Molding Bolt | 2.5 N.m (22 lb in) |