Circuit/System Verification
- Ignition ON.
- Verify the A23C Liftgate Latch releases the liftgate when pressing the E7AC Rear License Plate Lamp Module.
- If the A23C Liftgate Latch does not release
Refer to Circuit/System Testing
- Go to next step: If the A23C Liftgate Latch does release
- If the A23C Liftgate Latch does not release
- Verify the A23C Liftgate Latch cinches the liftgate to the fully closed position while gently pushing the liftgate closed.
- If the A23C Liftgate Latch does not cinch
Refer to Circuit/System Testing
- Go to next step: If the A23C Liftgate Latch cinch works
- If the A23C Liftgate Latch does not cinch
- A fault is not currently present and may be an intermittent condition