Circuit/System Verification
- Verify the S45 Liftgate Control Switch is set to the Off setting.
- Liftgate closed and latched, verify the A23C Liftgate Latch will activate and release the liftgate when pressing the E7AC Rear License Plate Lamp Module.
- If the liftgate does not release when pressing the E7AC Rear License Plate Lamp Module
Refer to Circuit/System Testing
- Go to next step: If the liftgate does release when pressing the E7AC Rear License Plate Lamp Module
- If the liftgate does not release when pressing the E7AC Rear License Plate Lamp Module
- A fault is not currently present and may be an intermittent condition