Component Testing
- Ignition/Vehicle - Off
- Disconnect the appropriate electrical connector:
- A24LR Rear Side Door Outside Handle - Left
- A24RR Rear Side Door Outside Handle - Right
- Test for infinite resistance between the test points: Signal terminal 1 & Ground terminal 5 - Not Pressed
- If less than infinite resistance
Replace the component: A24LR Rear Side Door Outside Handle - Left or A24RR Rear Side Door Outside Handle - Right
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 3 ohms between the test points: Signal terminal 1 & Ground terminal 5 - Pressed
- If less than infinite resistance
Replace the component: A24LR Rear Side Door Outside Handle - Left or A24RR Rear Side Door Outside Handle - Right
- Go to next step: If less than 3 ohms
- If less than infinite resistance
- All OK.