Component Testing

SS45B Liftgate Control Switch - Interior-Static Test

1. Ignition/Vehicle - Off
2. Disconnect the electrical connector: S45B Liftgate Control Switch - Interior
3. Test for infinite resistance between the test points: Signal terminal 4 & Ground terminal 1 - Not Pressed
   • If less than infinite resistance 

     Replace the component: S45B Liftgate Control Switch - Interior

   • Go to next step: If infinite resistance 
4. Test for less than 3 ohms between the test points: Signal terminal 4 & Ground terminal 1 - Pressed
   • If 3 ohms or greater 

     Replace the component: S45B Liftgate Control Switch - Interior

   • Go to next step: If less than 3 ohms 
5. Test for 1k to 1.3k ohms between the test points: Signal terminal 3 & Ground terminal 1 - Switch S45B in position: Off
   • If not between 1k and 1.3k ohms 

     Replace the component: S45B Liftgate Control Switch - Interior

   • Go to next step: If between 1k and 1.3k ohms 
6. Test for 11k to 13k ohms between the test points: Signal terminal 3 & Ground terminal 1 - Switch S45B in position: 3/4
   • If not between 11k and 13k ohms 

     Replace the component: S45B Liftgate Control Switch - Interior

   • Go to next step: If between 11k and 13k ohms 
7. Test for 4k to 4.5k ohms between the test points: Signal terminal 3 & Ground terminal 1 - Switch S45B in position: Max
   • If not between 4k and 4.5k ohms 

     Replace the component: S45B Liftgate Control Switch - Interior

   • Go to next step: If between 4k and 4.5k ohms 
8. All OK.