LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2021 >> Envision Preferred, AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> DTC B11BB >> Component Testing

Component Testing

Static Test

  1. Ignition OFF, disconnect the harness connector at the A23P Door Latch Assembly-Passenger.
  2. With the door in the closed position, test for infinite resistance between the signal terminal 7 and ground terminal 9
    • If not the specified value, replace the A23P Door Latch Assembly-Passenger.
  3. With the door in the open position, test for less than 5 Ω between the signal terminal 7 and ground terminal 9
    • If greater than the specified range, replace the A23P Door Latch Assembly-Passenger.
scientia non olet · About LEMON Manuals