LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2021 >> Envision Preferred, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> DTC B15EC or B15ED >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On/Vehicle - In Service Mode
  2. Verify the scan tool parameter: Left Rear Door Exterior Lock/Unlock Switch Status = Inactive
    • If not the specified state 

      Refer to Circuit/System Testing - Test 1

    • Go to next step: If the specified state 
  3. Operate the component: A24LR Rear Side Door Outside Handle - Left - Pressed

    Verify the scan tool parameter: Left Rear Door Exterior Lock/Unlock Switch Status = Active

    • If not the specified state 

      Refer to Circuit/System Testing - Test 1

    • Go to next step: If the specified state 
  4. Verify the scan tool parameter: Right Rear Door Exterior Lock/Unlock Switch Status = Inactive
    • If not the specified state 

      Refer to Circuit/System Testing - Test 2

    • Go to next step: If the specified state 
  5. Operate the component: A24RR Rear Side Door Outside Handle - Right - Pressed

    Verify the scan tool parameter: Right Rear Door Exterior Lock/Unlock Switch Status = Active

    • If not the specified state 

      Refer to Circuit/System Testing - Test 2

    • Go to next step: If the specified state 
  6. A fault is not currently present and may be an intermittent condition
scientia non olet · About LEMON Manuals