Installation Procedure
- NOTE:
When installing the battery monitor module clamp onto the battery negative post, make sure the clamp is wide enough to sit all the way on the bottom of the battery negative post before tightening the nut.
Battery Monitor Module (2) - Install
- Battery Negative Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb/in)
Electrical Connector (1) - Connect
Battery Negative Cable (2) - Install
- Battery Negative Cable Nut (1) @ Battery Monitor Module (3) - Install and tighten 11 N.m (97 lb/in)
- Perform the battery sensor learn procedure. Battery Sensor Module Learn
CAUTION:
Refer to Fastener Caution