Rear Closure Hands Free Module Replacement (Base Bumper)

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION (3.6L LGX) or BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION (2.0L LTG) Rear Bumper Valance Panel Replacement (Base)
1	Rear Closure Hands Free Module Procedure Disconnect the electrical connectors. Unlock the retaining tabs. Programming and Setup - Control Module References

Callout

Component Name

Preliminary Procedure

BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION (3.6L LGX) or BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION (2.0L LTG)
Rear Bumper Valance Panel Replacement (Base)

Rear Closure Hands Free Module

Procedure

Disconnect the electrical connectors.
Unlock the retaining tabs.
Programming and Setup - Control Module References