Installation Procedure
WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Speed Sensor(1) - Install
- CAUTION:
Wheel Speed Sensor Bolt(1) - Install and tighten9 N.m (80 lb in)
Retainer(1)@Upper Control Arm - Secure[4x]
Retainer(1)@Rear Suspension Cradle - Secure
Retainer(1)@Rear Suspension Cradle - Secure
- Wheel Speed Sensor Electrical Connector - Connect
- Verify the repair is complete. Refer to Diagnostic Repair Verification