LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C0561 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC C0561is not set.
    • If the DTC is set 
    1. Reprogram the K17 Electronic Brake Control Module. Refer to Control Module References .
    2. Verity DTC C0561is not set.
      • If the DTC is set, replace the K17 Electronic Brake Control Module.
      • Go to next step: If the DTC is not set
    3. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.
scientia non olet · About LEMON Manuals