LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C0115 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC C0110 is not set.
    • Go to next step: If DTC C0110 is not set 
  3. Verify that DTC C0115 does not set while driving the vehicle under normal braking conditions.
    • If DTC C0115 sets 

      Replace the Q5 Brake Pressure Modulator.

    • Go to next step: If DTC C0115 does not set 
  4. All OK.