LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Column Lock Control Module Replacement

Steering Column Lock Control Module Replacement

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM4839782
Callout Component Name
WARNING:

Before installing the steering column lock control module to the steering column, ensure that no fasteners or debris fall into the column. If fasteners or debris fall into the column, it will cause binding of the steering system, which may result in bodily injury or death.

Preliminary Procedure Unlock the steering column lock control module and remove the steering column along with the steering wheel. Steering Column Replacement 
1 Steering Column Lock Control Module Bolt- Rear[2x]
Tighten 
9.5 N.m (84 lb in)
2 Steering Column Lock Control Module Bolt- Side[2x]
Tighten 
9.5 N.m (84 lb in)
3 Steering Column Lock Control Module

Procedure

  1. Move in the direction of the arrow.
  2. Program the steering column lock control module. Control Module References