LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Hydraulic Brake System) >> Repair Instructions >> Front Brake Pipe Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Brake Pipe - Install
  2. GM4235921Courtesy of GENERAL MOTORS COMPANY

    Brake Pipe Fitting (1) @Brake Hose - Install and tighten18 N.m (13 lb ft)

  3. GM4235918Courtesy of GENERAL MOTORS COMPANY

    Clip (1) @Side Rail - Secure

  4. Lower the vehicle.
  5. GM4235915Courtesy of GENERAL MOTORS COMPANY

    Clip (1) - Secure

  6. GM4235914Courtesy of GENERAL MOTORS COMPANY

    Left Front Brake Pipe Fitting (1) - Install and tighten18 N.m (13 lb ft)

  7. Radiator Surge Tank Replacement - Install
  8. Bleed the brake system. Hydraulic Brake System Bleeding (Pressure)  or Hydraulic Brake System Bleeding (Manual)