LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Rear Suspension System) >> Repair Instructions >> Trailing Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
  3. Rear Tire Front Air Deflector - Remove - Rear Tire Front Air Deflector Replacement
  4. Support the rear suspension lower control arm with an appropriate jack stand.
  5. GM4195227

    Lower the rear suspension lower control arm (1) to provide clearance for the rear suspension trailing arm bolt. Lower Control Arm Replacement (FWD) Lower Control Arm Replacement (AWD) 

  6. GM4196192

    Rear Suspension Trailing Arm Bolt(1) - Remove and DISCARD[2x]

  7. GM4196204

    Rear Suspension Trailing Arm Bracket Bolt(1) - Remove and DISCARD[4x]

  8. GM4196221

    Rear Suspension Trailing Arm and Bracket(1) - Remove

  9. Mark the relationship between the rear suspension trailing arm (1) and the rear suspension trailing arm bracket.
  10. GM4196224

    Rear Suspension Trailing Arm Bracket Nut(1) - Remove

  11. Rear Suspension Trailing Arm Bracket Bolt(2) - Remove and DISCARD
  12. Separate the rear suspension trailing arm bracket (3) from the rear suspension trailing arm (4).
scientia non olet · About LEMON Manuals