LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Wheel Alignment) >> Repair Instructions >> Rear Toe Adjustment (GNQ)

Rear Toe Adjustment (GNQ)

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the alignment angles and record the readings. Wheel Alignment Measurement .
  2. GM4485102

    Rear Suspension Adjust Link Inner Nut(1) - Loosen

  3. GM4485108

    Rotate the rear suspension adjust link inner bolt (1) until the proper toe measurement is achieved. Wheel Alignment Specifications (4-Door Hatchback 68) Wheel Alignment Specifications (4-Door Station Wagon 35) .

    NOTE:

    Tighten the rear suspension adjust link nut enough to maintain the adjustment. Verify the rear toe reading prior to tightening the bolt to its final torque.

  4. GM4485102

    Hold the rear suspension adjust link inner bolt and tighten the rear suspension adjust link inner nut (1). Adjust Link Replacement (FWD)Adjust Link Replacement (AWD)

  5. Check the alignment specification and readjust if necessary. Wheel Alignment Specifications (4-Door Hatchback 68) Wheel Alignment Specifications (4-Door Station Wagon 35) 
scientia non olet · About LEMON Manuals