Installation Procedure
WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
Align the retainers (1) on the front floor console trim plate (2) to the slots in the front floor console assembly.
- Front Floor Console Trim Plate - Install
Manual Transmission: Install the lever boot bezel (1). First install the bezel at the rear then clip in the front of the bezel. Clip in 6 retainers (arrows).
Automatic Transmission: Connect electrical connector (1).
Automatic Transmission: Install the transmission control lever boot bezel (1). First install the bezel at the rear then clip in the front of the bezel. Clip in 6 retainers (arrows).
- Automatic Transmission: Shift the transmission control lever into "P" position.
- Release the parking brake.