LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Remote Functions System) >> Diagnostic Information and Procedures >> DTC B3105 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the transmitter is a correct transmitter for the vehicle. This can be accomplished by comparing the part number printed on the transmitter to the appropriate part number in the parts catalog.
    • If the transmitter is incorrect 

      Replace the transmitter.

    • Go to next step: If the transmitter is correct 
  2. Program the transmitter. Refer to Key with Integrated Transmitter Programming (without BTM) , or Key with Integrated Transmitter Programming (with BTM) .
  3. Verify the transmitter has successfully completed the programming procedure.
    • If the transmitter does not program successfully 

      Replace the transmitter.

    • Go to next step: If the transmitter programs successfully 
  4. All OK.
scientia non olet · About LEMON Manuals