LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Driver Assistance Systems) >> Diagnostic Information and Procedures >> DTC B1008 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    This DTC can be set as a history DTC without affecting the operation of the component: B174W Frontview Camera - Windshield

  1. Ignition - On/Vehicle - In Service Mode
  2. Verify DTC B101E 42 is not set.
    • Go to next step: If the DTC is not set 
  3. Verify DTC B1008 is not set.
    • If DTC B1008 is set 
    1. Perform the following procedure/test: Front View Camera Module Learn .
    2. Verify DTC B1008 is not set.
      • If the DTC sets - Replace the component: B174W Frontview Camera - Windshield
      • Go to next step: If the DTC is not set
    3. All OK.
    • Go to next step: If the DTC is not set 
  4. All OK.
scientia non olet · About LEMON Manuals