Installation Procedure
WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
Align the retainers (1) on the front floor console trim plate (2) to the slots in the front floor console assembly.
- Front Floor Console Trim Plate - Install
Manual Transmission: Install the lever boot bezel (1). First install the bezel at the rear then clip in the front of the bezel. Clip in 6 retainers (arrows).
Automatic Transmission: Connect electrical connector (1).
Automatic Transmission: Install the transmission control lever boot bezel (1). First install the bezel at the rear then clip in the front of the bezel. Clip in 6 retainers (arrows).
- Automatic Transmission: Shift the transmission control lever into "P" position.
- Release the parking brake.