Lockout Switch Feature

The child door lockout switch is on the driver door lock/window switch and controls the child locks on the rear doors as well as the rear window switches. When the BCM receives a command from the window lockout switch, it will apply voltage to the door lock security relay coil, this will energize the relay and the contact within the relay will then direct the voltage to lock the left rear and right rear child locks and then isolate them from the normal door lock system to prevent the rear doors from being opened by using the interior rear door handles.

The BCM monitors the voltage level of the rear lock status signal circuits to determine if the rear door latches have been locked out. A switch within the rear door latch will be open or closed depending upon the lockout status of the rear latch. If the rear latches are locked out, the switch will be open and the BCM will disable the functions of the rear window switches. If the latches have not been lockout, the switch will be closed, pulling the voltage within the signal circuit to 0 volts and the BCM will permit normal rear window switch functions.