Removal Procedure
- Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) , and Battery Negative Cable Disconnection and Connection (with KL9) .
- Remove engine cover. Refer to Engine Cover Replacement .
- Remove the fuel feed pipe from fuel injection fuel rail. Refer to Fuel Feed Pipe Replacement (Engine to Tank) .
- Remove the positive crankcase ventilation pipe from the intake manifold. Refer to Positive Crankcase Ventilation Pipe Removal .
Disconnect the 4 fuel injector wiring harness plugs (2).
- Unclip the ECM wiring harness from retainer clips (1) and the camshaft cover.
Remove the ground cable nut (2) and the ground cable.
- Remove the 2 fuel injection fuel rail bolts (1).
Remove the fuel injection fuel rail assembly (1) and the 4 fuel injector seal rings (2).