LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Encore Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> 12 V Battery, Starting System And Charging System >> Repair Instructions >> Battery Positive Cable Junction Block Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection (without KL9) , and Battery Negative Cable Disconnection and Connection (with KL9) 
  2. GM4751259Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Cable Junction Block Cover (1) - Remove

  3. Fig 1: Identifying Body Harness, Battery Positive Cables, Nuts And Electrical Connectors
    GM4751260Courtesy of GENERAL MOTORS COMPANY

    Body Harness Terminal Nut (4) - Loosen

  4. Body Harness (3) - Remove
  5. Battery Positive Cable Nut (1) - Remove
  6. Battery Positive Cable (2) - Remove
  7. Battery Positive Cable Nut (6) - Remove
  8. Battery Positive Cable (5) - Remove
  9. Electrical Connector (7) - Disconnect [2x]
  10. GM4751262Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Post Clamp Nut (1) - Loosen

  11. Battery Positive Cable Junction Block (2) - Remove
scientia non olet · About LEMON Manuals