Installation Procedure
Generator(3) - Install
- Generator Mounting Stud(1) - Install and tighten[2x]9 N.m (80 lb in)
- Generator Mounting Nut(2) - Install and tighten[2x]58 N.m (43 lb ft)
Electrical Connector(1) - Connect
Battery Positive Cable(2) - Install
- Generator Fastener(1) - Install and tighten 15 N.m (11 lb ft)
- Belt Idler Pulley - Install - Belt Idler Pulley Replacement
- Install the intake manifold cover. Intake Manifold Cover Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution