LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Enclave Preferred >> Repair and Diagnosis >> Electrical >> Charging Systems >> 12 V Battery, Starting System And Charging System >> Repair Instructions >> Battery Replacement >> Installation Procedure

Installation Procedure

  1. GM4733231Courtesy of GENERAL MOTORS COMPANY

    Battery(1) - Install

  2. GM4733223Courtesy of GENERAL MOTORS COMPANY

    Battery Hold Down Retainer(4) - Install

    3. CAUTION:

    Refer to Fastener Caution

  3. Battery Hold Down Bolt(3) - Install and tighten 22 N.m (16 lb ft)
  4. Battery Hold Down Retainer(1) - Install
  5. Battery Hold Down Retainer Bolt (2) - Install and tighten 9 N.m (80 lb in)
  6. GM4733206Courtesy of GENERAL MOTORS COMPANY

    Fuse Block(2) - Install

  7. Retaining Tab(1) - Engage[2x]
  8. GM4733193Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Post Clamp Nut(1) - Tighten - Fuse Block Replacement

  9. Retainer(2) - Engage
  10. GM4735395Courtesy of GENERAL MOTORS COMPANY

    Install and tighten the 2 m8 fuse block wiring harness terminals and nuts (1). Fuse Block Replacement

  11. GM4818716Courtesy of GENERAL MOTORS COMPANY

    Install and tighten the 2 m6 fuse block wiring harness terminals and nuts (1). Fuse Block Replacement

  12. GM4733188Courtesy of GENERAL MOTORS COMPANY

    Close the battery fuse block cover. (2)

  13. Retainer(1) - Engage
  14. Install the engine control module bracket along with the engine control module to the battery tray. Engine Control Module Bracket Replacement
  15. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection 
scientia non olet · About LEMON Manuals