LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Enclave Preferred >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> 12 V Battery, Starting System And Charging System >> Repair Instructions >> Battery Monitor Module Replacement >> Installation Procedure

Installation Procedure

  1. GM4736948Courtesy of GENERAL MOTORS COMPANY

    Battery Monitor Module(2) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Battery Negative Post Clamp Nut(1) - Tighten 4.5 N.m (40 lb in)
  3. GM4736946Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector(1) - Connect

  4. GM4728656Courtesy of GENERAL MOTORS COMPANY

    Battery Negative Cable(2) - Install

  5. Battery Negative Cable Nut(1) @ Battery Monitor Module(3) - Install and tighten 11 N.m (97 lb in)
  6. Perform the battery sensor learn procedure. Battery Sensor Module Learn 
scientia non olet · About LEMON Manuals