LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Antilock Brake System) >> Repair Instructions >> Electronic Brake Control Module Replacement

Electronic Brake Control Module Replacement

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM4852718Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement (2.0L LTG)  or Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement (3.6L LGX) 
1 Electronic Brake Control Module Bolt[4x]
Tighten 
3N.m (27 lb in)
2 Electronic Brake Control Module

Procedure

  1. Separate the control module and modulator valve only in a clean environment.
  2. Run all necessary programming and setup procedures. Refer to Control Module References