LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Tire Pressure Monitoring System) >> Diagnostic Information and Procedures >> DTC C0569 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition On/Vehicle in Service Mode.
  2. Enter the tire type and pressure information into the K9 Body Control Module with a scan tool. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label .
  3. Ignition OFF, then Ignition On/Vehicle in Service Mode.
  4. Verify DTC C0569 is not set.
    • If the DTC is set 

      Replace the K9 Body Control Module.

    • Go to next step: If the DTC is not set. 
  5. All OK.
scientia non olet · About LEMON Manuals