Fastener Specifications (LGX)
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Bolt | 22 N.m (16 lb ft) |
| Battery Hold Down Retainer Nut | 9 N.m (80 lb in) |
| Battery Negative Cable Frame Ground Fastener | 9 N.m (80 lb in) |
| Battery Negative Cable Nut (Battery Sensor) | 16 N.m (12 lb ft) |
| Battery Positive Cable Conduit Bolt | 9 N.m (80 lb in) |
| Battery Post Negative Cable Clamp Nut | 5 N.m (44 lb in) |
| Battery Post Positive Cable Clamp Nut | 5 N.m (44 lb in) |
| Battery Tray Fastener | 22 N.m (16 lb ft) |
| Engine Wiring Harness Fuse Block Bracket Bolt | 2.5 N.m (22 lb in) |
| Generator Mounting Bolt | 22 N.m (16 lb ft) |
| Generator Nut | 15 N.m (11 lb ft) |
| Starter Bolt | 58 N.m (43 lb ft) |
| Starter Solenoid Cable Nut | 12.5 N.m (111 lb in) |