Circuit/System Testing
- Ignition OFF, disconnect the X2 harness connector at the K171 Hands-Free Liftgate Sensor Control Module.
- Test for less than 1 Ω between the B275A Hands-Free Liftgate Sensor - Upper signal circuit terminal 1 and the signal circuit terminal 2.
- If 1 Ω or greater
- Replace the B275A Hands-Free Liftgate Sensor - Upper
- Go to next step: If less than 1 Ω
- Ignition OFF, disconnect the X3 harness connector at the K171 Hands-Free Liftgate Sensor Control Module.
- Test for less than 1 Ω between the B275B Hands-Free Liftgate Sensor-Lower signal circuit terminal 1 and the signal circuit terminal 2.
- If 1 Ω or greater
- Replace the B275B Hands-Free Liftgate Sensor-Lower
- Go to next step: If less than 1 Ω
- If all circuits test normal, replace the K171 Hands-Free Liftgate Sensor Control Module.