LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> DTC B153F - Liftgate Object Sensor Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Liftgate Secondary Obstacle Detection parameter is between 3 V-3.5 V.
    • If not between 3 V-3.5 V 

      Refer to Circuit/System Testing.

    • Go to next step: If between 3 V-3.5 V 
  3. Verify the scan tool Liftgate Secondary Obstacle Detection parameter is between 3 V-3.5 V and changes to 2.25-2.75 V as the B71R Liftgate Object Sensor - Right is pressed.
    • If not between 2.25-2.75 V or does not change 

      Test or replace the B71R Liftgate Object Sensor - Right.

    • Go to next step: If between 2.25-2.75 V and changes 
  4. Verify the scan tool Liftgate Secondary Obstacle Detection parameter is between 3 V-3.5 V and changes to 2.25-2.75 V as the B71L Liftgate Object Sensor - Left is pressed.
    • If not between 2.25-2.75 V or does not change 

      Test or replace the B71L Liftgate Object Sensor - Left.

    • Go to next step: If between 2.25-2.75 V and changes 
  5. All OK.
scientia non olet · About LEMON Manuals