LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> LaCrosse Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement (Without KL9) >> Installation Procedure

Installation Procedure

  1. GM4738784Courtesy of GENERAL MOTORS COMPANY

    Battery Current Sensor (2) - Install

  2. Battery Negative Cable (3) - Install
    3. CAUTION:

    Refer to Fastener Caution

  3. Battery Negative Cable Ground Nut (1) - Install and tighten 16N.m (12 lb ft)
  4. GM4738782Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (2)@Battery Current Sensor (1) - Connect

  5. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection (Without KL9) 
  6. Install the left side rear compartment side trim panel. Rear Compartment Side Trim Replacement - Left Side (With LHN)Rear Compartment Side Trim Replacement - Left Side (With LGX)
scientia non olet · About LEMON Manuals