Fastener Specifications
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Power Transfer Unit O-Ring |
| Power Transfer Unit Retaining Ring |
| Wheel Drive Shaft O-Ring |
| Wheel Drive Shaft Retaining Ring |
| Wheel Drive Shaft Washer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Wheel Drive Shaft Nut | |
| First Pass: | 285 N.m (210 lb ft) |
| Second Pass: | Loosen 360 degrees |
| Final Pass: | 250 N.m (185 lb ft) |
| Rear Wheel Drive Shaft Nut | |
| First Pass: | 150 N.m (111 lb ft) |
| Second Pass: | Loosen 45 degrees |
| Final Pass: | 250 N.m (185 lb ft) |