Installation Procedure
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Rear Brake Caliper Bracket (1) - Install
- Prepare the brake caliper bracket bolts and the bracket threaded holes for assembly:
- Thoroughly clean the residue from the bolt threads with denatured alcohol or equivalent and allow to dry.
- Thoroughly clean the residue from the threaded holes with denatured alcohol or equivalent and allow to dry.
- Apply threadlocker to 2/3 of the threaded length of the bolts. Adhesives, Fluids, Lubricants, and Sealers
- Ensure there are no gaps in the threadlocker along the length of the filled area of the bolts.
- CAUTION:
Refer to Fastener Caution .
Brake Caliper Bracket Lower Bolt (1) - Install 100 N.m (74 lb ft) + 15-30 degrees
Brake Caliper Bracket Upper Bolt (1) - Install 100 N.m (74 lb ft) + 15-30 degrees
- Install the rear disc brake pads. Rear Disc Brake Pads Replacement
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation