Removal Procedure
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Brake Dust Warning .
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
Brake Caliper Guide Pin Bolt (1) - Remove [2x]
- Remove the brake caliper and support with heavy mechanics wire.
Inner Disc Brake Pad (1) - Remove
Outer Disc Brake Pad (1) - Remove
Disc Brake Pad Spring (1) - Remove [2x]
Caliper Lower Guide Pin (1) Guide Pin Seal (2) - Remove
Caliper Upper Guide Pin (1) Guide Pin Seal (2) - Remove
Brake Caliper Bracket Bolt (1) - Remove [2x]
Front Brake Caliper Bracket (1) - Remove
- Front Brake Caliper Bracket - Inspect for damage
- Replace the brake caliper bracket if cracked or damaged.
CAUTION:
Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.