LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Envision Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Power Transfer Unit/Transfer Case - AAM >> Repair Instructions - On Vehicle >> Transfer Case Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM3824202Courtesy of GENERAL MOTORS COMPANY

    Position the bracket (6) to the transfer case.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transfer case-to-transmission bolts (2, 3) and tighten to 22 N.m (16 lb ft).
  3. Install the transfer case-to-transmission bolt (1) and tighten to 22 N.m (16 lb ft).
  4. Install the transfer case-to-transmission bolt (4, 5) and tighten to 58 N.m (43 lb ft).
  5. Install the right wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side (MHG, M3T with F46) , or Front Wheel Drive Shaft Replacement - Right Side (MHG without F46) .
  6. Install the exhaust front pipe. Refer to Exhaust Front Pipe Replacement (LCV) , or Exhaust Front Pipe Replacement (LTG) .
scientia non olet · About LEMON Manuals