Inside Rearview Mirror Replacement

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Windshield Multifunction Sensor Mount Bracket Cover Replacement
1	Inside Rearview Mirror Fastener CAUTION: Refer to Fastener Caution . Procedure Disconnect the electrical connector. Adjust the mirror to the full upward position. Loosen the set screw located at the base of the mirror. Tighten 1.8 N.m (16 lb in)
2	Inside Rearview Mirror Procedure Slide the mirror upward off of the rearview mirror button. For programming and setup procedures, if required. Control Module References

Callout

Component Name

Preliminary Procedure
Windshield Multifunction Sensor Mount Bracket Cover Replacement

Inside Rearview Mirror Fastener

CAUTION:

Refer to Fastener Caution .

Procedure

Disconnect the electrical connector.
Adjust the mirror to the full upward position.
Loosen the set screw located at the base of the mirror.

Tighten
1.8 N.m (16 lb in)

Inside Rearview Mirror

Procedure

Slide the mirror upward off of the rearview mirror button.
For programming and setup procedures, if required. Control Module References