Installation Procedure
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Wheel Speed Sensor - Install
Rear Wheel Speed Sensor Electrical Connector (1) - Connect
- Raise and secure the rear suspension cradle. Rear Suspension Cradle Replacement
Rear Wheel Speed Sensor Retainer (1) - Install [2x]
Rear Wheel Speed Sensor Retainer (1) - Install
- CAUTION:
Refer to Fastener Caution .
Rear Wheel Speed Sensor Bolt (1) - Install 6 N.m (53 lb in)
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Perform the diagnostic system check. Diagnostic System Check - Vehicle