Circuit/System Verification
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On/Vehicle - In Service Mode
- Verify that no DTCs are set.
- If any DTC is set
- Go to next step: If no DTC is set
- Verify the component turns On and Off: Lane Departure Warning Indicator
- Lane Departure Warning Switch
- If the component does not turn On and Off
Refer to: DTC B0987
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.