LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Driver Assistance Systems) >> Diagnostic Information and Procedures >> DTC B1015 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On/Vehicle - In Service Mode
  2. Verify DTC B1015 is not set.
    • If the DTC is set 
    1. Program the control module: B174W Frontview Camera - Windshield or K124 Active Safety Control Module
    2. Ignition - On/Vehicle - In Service Mode
    3. Verify DTC B1015 is not set. If the DTC is set
      • If the DTC is set

        Replace the appropriate component: B174W Frontview Camera - Windshield or K124 Active Safety Control Module

      • Go to next step: If the DTC is not set
    4. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.
scientia non olet · About LEMON Manuals