LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> Auxiliary Audio Input Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify DTC B124B is not set. Since occurrences of this DTC can be caused by an incompatible or faulty USB device, review with the customer the conditions under which their concern occurred.
    • If DTC B124B is set. 

      Refer to Circuit/System Testing.

    • Go to next step: If DTC B124B is not set. 
  2. Ignition ON, infotainment system ON.
  3. Connect the EL-50334-20 Multi-Media Interface Tester (MIT) to the X83 Auxiliary Audio Input USB port and select the USB test mode.
  4. Verify the audio from the EL-50334-20 Multi-Media Interface Tester (MIT) is heard through the infotainment system while operating the system to play audio from the test tool.
    • If audio is not heard from the test tool 
    1. Insert an SD card with compatible media into the SD card slot.
    2. Verify the media on the SD card can be accessed while operating the system to connect to the SD card.
    • If the SD card reader cannot be accessed, refer to Circuit/System Testing.
    • If the SD card reader can be accessed, replace the X83 Auxiliary Audio Input.
    • Go to next step: If audio is heard from the test tool 
  5. Insert an SD card with compatible media into the SD card slot.
  6. Verify the media on the SD card can be accessed while operating the system to connect to the SD card.
    • If the SD card reader media cannot be accessed 

      Refer to Circuit/System Testing

    • Go to next step: If the SD card reader media can be accessed 
  7. All OK.
scientia non olet · About LEMON Manuals