Installation Procedure
Install the battery (2) into position on the battery tray using the assist handles (1).
- CAUTION:
Refer to Fastener Caution .
Install the battery retaining bracket (1) and Tighten the fastener (2) to 9 N.m (80 lb in).
Install the battery fuse block (3) into position on the battery positive post (4) and Tighten the fastener (2) to 4.5 N.m (40 lb in).
- Close the battery fuse block cover (1).
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection .
- Reprogram the window express function. Window Motor Programming - Express Function
- Calibrate the power steering control module. Power Steering Control Module Calibration