LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Envision Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> DTC B153F - Liftgate Object Sensor Malfunction >> Component Testing

Component Testing

  1. Ignition/Vehicle - Off
  2. Disconnect the appropriate electrical connector: B71R Liftgate Object Sensor - RightorB71L Liftgate Object Sensor - Left
  3. Test for 8k ohms to 12 kohms between the test points: Signal terminal 2 & Low Reference terminal 1 - Not Pressed
    • If not between 8k and 12k ohms 

      Replace the component: B71R Liftgate Object Sensor - RightorB71L Liftgate Object Sensor - Left

    • Go to next step: If between 8k and 12k ohms 
  4. All OK.
scientia non olet · About LEMON Manuals