LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Gear Outlet Pipe/Hose Replacement >> Installation Procedure

Installation Procedure

  1. GM2808015Courtesy of GENERAL MOTORS COMPANY

    Position the power steering gear inlet hose (2) on the vehicle.

  2. Power Steering Gear Outlet Hose Seal (4) - Install

    Install a NEW seal.

  3. Power Steering Gear Inlet Hose Seal (4) - Install

    Install a NEW seal.

  4. Power Steering Gear Outlet Hose (3) @ Steering Gear - Install
  5. Power Steering Gear Inlet Hose (2) @ Steering Gear - Install
    6. CAUTION:

    Refer to Fastener Caution .

  6. Power Steering Gear Inlet and Outlet Hose Bolt (1) - Install and tighten 11 N.m (97 lb in)
  7. GM2809970Courtesy of GENERAL MOTORS COMPANY

    Secure the power steering gear outlet hose (3) to the drivetrain and front suspension frame using the plastic push pin (2) and the power steering gear inlet hose bracket bolt (1).

  8. Power Steering Gear Outlet Hose Bracket Bolt (1) - Install and tighten 9 N.m (80 lb in)
  9. GM2809971Courtesy of GENERAL MOTORS COMPANY

    Power Steering Gear Outlet Hose (2) @ Power Steering Fluid Cooler - Install

  10. Power Steering Gear Outlet Hose Clamp (1) - Engage
  11. Install the right front tire and wheel assembly. Tire and Wheel Removal and Installation
  12. Fill and bleed the power steering system. Power Steering System Bleeding 
scientia non olet · About LEMON Manuals