LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Keyless Entry System And Remote Functions) >> Diagnostic Information and Procedures >> DTC B3105 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the transmitter is a correct transmitter for the vehicle. This can be accomplished by comparing the part number printed on the transmitter to the appropriate part number in the parts catalog.
    • If the transmitter is incorrect 

      Replace the transmitter.

    • Go to next step: If the transmitter is correct 
  2. Program the transmitter. Refer to Key with Integrated Transmitter Programming (without BTM)Key with Integrated Transmitter Programming (with BTM) .
  3. Verify the transmitter has successfully completed the programming procedure.
    • If the transmitter does not program successfully 

      Replace the transmitter.

    • Go to next step: If the transmitter programs successfully 
  4. All OK.
scientia non olet · About LEMON Manuals