Circuit/System Verification

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Verify that the stop lamps operate properly and that no B22 Brake Pedal Position Sensor related DTCs are set.
- If brake pedal position sensor related DTCs are set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle
- Go to next step: If no brake pedal position sensor related DTCs are set
Verify that no DTCs are set, except DTC P0571.
- If any other DTC is set, except DTC P0571
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If only DTC P0571 is set
Replace the K20 Engine Control Module.
Verify DTC P0571 does not set when operating the vehicle within the conditions for running the DTC.
- If the DTC sets
  Replace the K9 Body Control Module.
- Go to next step: If the DTC does not set
All OK.