LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Wheel And Column >> Diagnostic Information and Procedures >> DTC B1023 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Clear the DTCs.
  3. Operate the vehicle within the Conditions for Running the DTC.Verify DTC B1023 is not set.
    • If the DTC is set 

      Replace the component: K60 Steering Column Lock Module

    • Go to next step: If the DTC is not set 
  4. All OK.