LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Envision Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C047A >> Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC C047A is not set.
    • If the DTC is set 
    1. Perform the Steering Wheel Angle Sensor Centering .
    2. Verify the DTC does not reset.
      • If the DTC resets, replace the K43 Power Steering Control Module.
      • Go to next step: If the DTC does not reset
    3. All OK.
    • Go to next step: If the DTC is not set 
  2. All OK.