LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Envision Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Data Communication System - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Scan Tool Does Not Communicate with Gateway Isolated High Speed GMLAN Device >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON/Vehicle In Service Mode.
  2. Verify that DTC U0073, U0074, U0075, U0077, U0078, U007A, P06E4, P1EB9, U1814, U2099, B1325, B1330, B1370, B1380, B1424, B1428, B1440, B1441, B1517, C0800, C0899, C12E1, P0560, or P0562 is not set.
    • Go to next step: If none of the DTCs are set 
  3. Attempt to communicate with all devices on the gateway isolated high speed GMLAN serial data circuits. Refer to Data Link References  to determine which devices are on the gateway isolated high speed GMLAN bus.
  4. Verify which devices are communicating on the gateway isolated high speed GMLAN serial data circuits.
    • If only one device is not communicating 

      Refer to Circuit/System Testing - Testing the Device Circuits.

    • If one or more devices are communicating but not all, except the K56 Serial Data Gateway Module 

      Refer to Circuit/System Testing - Testing the Serial Data Circuit for an Open/High Resistance.

    • Go to next step: If none of the devices are communicating, except the K56 Serial Data Gateway Module 
  5. Refer to Circuit/System Testing.
scientia non olet · About LEMON Manuals