If Slow to Calibrate

The ideal calibration condition is driving on a 2 lane divided highway with markings on both sides of the lane. One or more of the following conditions may increase the length of time required to complete the self-calibration procedure:

• Heavy traffic
• Stop and go traffic
• Mountain roads
• Curves in roadway
• Poor contrast lane markings
• Botts' Dots type lane markings
• Operating the vehicle at speeds greater than recommended
• Driving through snow or fog, or driving directly into the sun
• Camera not properly installed. Verify it is snapped into tabs and is secure. Refer to Front View Camera Replacement .

Calibration Procedure (Required for North American SPS users)

1. Apply the parking brake.
2. Place the transmission in Park (if applicable)
3. Install scan tool
4. Navigate to the module diagnostics menu
5. Select Frontview Camera Module
6. Select Configuration/Reset Functions menu Item
7. Select the Frontview Camera Learn procedure and follow the directions displayed on the screen.
8. Drive the vehicle to complete calibration.